Janardhan and G. L. Samuel, Investigations on Material Removal Rate in Wire Electrical Discharge Turning (WEDT) using Pulse Train Data Analysis, Journal of Mechatronics and Intelligent Manufacturing, (2011),2(1/2),17-39.
Janardhan and G. L. Samuel, Pulse Train Data Analysis to Investigate the Effect of Machining Parameters on the Performance Of Wire Electrical Discharge Turning (WEDT) Process, International Journal of Machine Tools and Manufacture,(2010), 50(9), 775-788. (Impact Factor: 8.019).
Janardhan and R. Prasanth Kumar. Generating Feasible Solutions for Dynamically Crossing a Wide Ditch by a Biped Robot. Journal of Intelligent and Robotic Systems, (2017), 88(1), 37-56. (ImpactFactor: 2.259).
Janardhan and R. Prasanth Kumar. Online Trajectory Generation for Wide Ditch Crossing of Biped Robots Using Control Constraints. Robotics and Autonomous Systems, 97 (2017), 61-82. (Impact Factor: 2.825).
Janardhan and R. Prasanth Kumar. Generating Real-time Trajectories for A Planar Biped Robot Crossing A Wide Ditch With Landing Uncertainties. Robotica 37(1), (2019), 109-140. (Impact Factor: 1.509).
Neel Gandhi ., Garlapati Nagababu and Vistapalli Janardhan, Modeling and Kinematic Analysis of a Robotic Manipulator for Street Cleaning Applications Using Screw Theory, Advances in Industrial Machines and Mechanisms, Springer-Lecture notes in mechanical engineering.
Neel Gandhi ., Garlapati Nagababu and Vistapalli Janardhan, Modeling and Kinematic Analysis of a Robotic Manipulator for Street Cleaning Applications Using Screw Theory, International conference on Industrial Problems on Machines and Mechanisms (IPRoMM-2020), BITS-Pilani, Hyderabad campus.
Aditya Sripada., V. Janardhan and R Prasanth Kumar, Biped Robot Vertical Jumping with Control Constraints, Proceedings of IEEE International Conference on Robotics and Biomimetics(ROBIO-2018), Kuala Lumpur, Malaysia, Dec 2018, pp. 1683-1687.
Janardhan and R. Prasanth Kumar. Kinematic Analysis of Biped Robot Forward Jump for Safe Locomotion. iNaCoMM2013, Proceedings of the 1st International and 16th National Conference on Machines and Mechanisms, IIT Roorkee, India, Dec 2013.
G. Dhake., V. Janardhan and G. L. Samuel, Machining and Evaluation of Axi-symmetric Forms Turned Using Cylindrical Wire-EDM process, Proceedings of 3rd International Conference on Advanced Design and Manufacturing,Nottingham, 7th -10th September 2010, Nottingham, UK. PP. 18-24.
Janardhan and G. L. Samuel, Investigations into Turning of Cylindrical Components Using Wire Electrical Discharge Machine, International Conference on Advances in Mechanical Engineering(ICAME- 2009), 3rd -5th August 2009, SV National Institute of Technology, Surat, pp. 835-839. (No of Citations: 3).